Solid-state amplifier
  a18p Stereo power amplifier
 
Stereo power amplifier
 
Integrated stereo amplifier
 
Integrated hybrid amplifier
Reference150 Linear
 
 
Model a18p is stereo power amplifier. Massive toroidal transformer with independent secondary windings and a bank of eight 10,000uF electrolytic reservoir capacitors for each channel's main power supply. Both left and right channels are built as mono power amplifiers, each with seven pairs of high-current transistors mounted onto a thick copper bus bar. This is bolted onto the extruded heat sink that's visible on either side of the amplifier.

Combined with the advantage of class AB and the class A technology, the Cool Class A technology actually achieved the same linear sound performance but without the normal need of a big electrical current, as Class A does.
 
Specification
Power output: 200W + 200W at 8 Ohms Dual Mono Minimum load 2 ohms speakers can be connected
Frequency response: Less than +/- 0.1 dB deviation 20Hz-80kHz
Phase response: Less than 2 degrees deviation 20Hz-80kHz
Signal-to-noise ratio: More than 95dB
Distortion: Less than 0.015% @ 100W 8 0hms
Damping factor: More than 1000
Dimensions: 20cm x 45cm x 45cm (HxWxD), 45kg shipment weight
 
RESOURCES
Owner's Manual
Copyright© The Opera audio Co.,Ltd
back